Link to ARI Home Page Link to ARI Products Link to ARI Specialized Services Link to Online Ordering Information

MTS-100 Pulse Preamplifier With High Voltage Decoupling Network

The MTS-100 Preamplifier is designed to amplify minute pulses from photomultiplier tubes, electron multipliers and similar detectors, to produce standard TTL pulses for counting applications. The MTS - 100 features a special decoupling high voltage network necessary to fulfill the detector bias requirements. With applications in Photon, Electron, and Ion counting, and fast PMT pulse processing, the MTS - 100 incorporates the popular, sensitive preamplifier used with the F-100T.
Maximum Pulse Repetition Rate >50 MHz
Input Range 2 µA to 4 mA (100 µV to 200 mV)
Input Linear Range 2 µA to 160 µA (100 µV to 8 mV)
Input Charge Sensitivity <20 fC
Linear Section Transimpedance Gain 50 dB
Transimpedance 18 kΩ
Input Impedance 50 Ω
Noise Referred to Input <0.4 µA p-p (20 µV p-p)
Input Pulse Polarity Negative
Input Pulse Rise Time <2 to 3 ns
Input Overvoltage Protection Standard
COLLECTOR (Input) Connector SHV
BIAS Connector SHV
H.V. SUPPLY Connector SHV
Threshold Adjustment Range 0 to 14 mV referred to input
Remote Threshold Input 0 to +5V (0 to 14 mV referred to input)
Pulse Pair Resolution <20 ns
Minimum Output Pulse Width 10 ns (Standard)
Maximum Output Pulse Width 1 µs
Output Impedance 50 Ω
Output Signal +5V (TTL)
Power and Signal Connector 9 pin mini D type
Second Output Signal BNC
Power Requirements ± 8VDC to ± 24VDC/50 mA
Physical Size 1.75"H x 2.4"W x 7.2"L
Download the Manual as a PDF file.

Prices

in US dollars
  Domestic International
MTS-100 $1,055.00 $1,319.00
Available options:
Linear amplifier output $40.00 $50.00
remote threshold control $92.00 $115.00
remote threshold monitor $40.00 $50.00

Contact Information